SHARE

How to Install a Bidet

It’s no secret that the world has been turned on it’s head early in 2020 as a result of the Coronavirus pandemic. Everyday items have disappeared off the shelves due to hoarding and hysteria. If you’ve tried to buy toilet paper in the last 60 days you know exactly what I’m talking about. So today I’m going to show you how to make the most of a shitty situation and install a bidet.

Click here for the tools and materials used in this project (affiliates) 

1.) Before Installing…

First you’ll need to order a bidet. Luckily, many bidet brands seem to be well stocked online. I picked up this $40 Luxe Bidet off Amazon. The price of bidets can range anywhere from $40 to $1000 depending on how many bells and whistles you want. I’m going to show you how to install this simple one that doesn’t include a heater or dryer. 

First of all, before you get started with this project you need to clean your toilet well. You’re going to get up close and personal with it so might as well take the time to clean it before you get down and dirty with it. Put your hair up and roll up your sleeves. 

2.) Installing Your Bidet

You’ll want to turn the water supply valve off at the base of the toilet. Then, flush the toilet to drain any water from the tank in the back. With the water drained, next you can remove the toilet seat. Do this by popping up the caps to access the mounting screws on the back of the seat. Using a screwdriver, loosen the mounting screws and retaining nuts from the underside of the seat and remove it.

From there, add the adjustment plates to the bidet assembly and place it on the toilet. The adjustment plates can be spun to align the mounting screws for your toilet. Next reinstall the toilet seat on top of the bidet and re-secure it in place with the mounting screws and retaining nuts underneath.

3.) Plumbing the Water Lines

After you install the bidet assembly, it’s time to shift gears to the toilet supply line. Grab a small bucket or container to catch any residual water that’s still in the toilet tank and remove the supply line from the toilet by unthreading it from the fill valve. Next, make sure the rubber gasket that came with the bidet is inserted into the included T-valve. Thread the T-valve onto the toilet fill valve assembly and make sure the outlet is facing towards the front of the toilet.

Once installed, connect the small braided hose that came with your bidet to the back of the bidet control module, and connect the supply line from the shutoff valve to the bottom of the T-valve. You may need to use thread tape to ensure a tight seal. You’ll find a small plastic wrench included with the bidet. You may also need a pair of channel lock pliers to tighten if you experience any leaks. 

Once the water lines are installed, turn the supply valve back on at the wall and fill the tank with water. If there are no leaks, it’s time to test the bidet. If you try to test it without sitting on it, beware that the water is going to launch across the room like a rocket so I recommend you test it when you plan to actually use it.

The first time you use a bidet can be a little jarring so I recommend you keep it on a low setting until you get comfortable. However, once you get used to it, I think you’ll find it difficult to go back to your old bathroom habits!

4.) Finished!

So that’s how you install a bidet! I hope you liked it and I hope you learned something. Installing a bidet is a super easy project to hopefully avoid the hassle of trying to buy TP in this world of crazy we’re all finding ourselves in! I hope you are yours are staying safe and healthy during this pandemic.

Like many people, I am trying to find ways to help out during this crisis and support those on the front lines so I have been 3D printing PPE components for medical professionals and essential personnel that I am sending for free to those in need. If you are able, you can make a small donation to help at this link. 100% of the proceeds will go towards materials, shipping, and production costs to distribute them to those that need them. If you’d like to download the files and print them for yourselves or community, there is a link down below where you can download them for free here.

If you liked this project, you might enjoy these other DIY Plumbing Projects as well:

How to Install a Bathroom Faucet

How to Fix a Garbage Disposal

Thanks for stopping by, I’ll see you next time!

Join the MRFIXITDIY.COM Newsletter


Sign up to get the latest content by email.

We won't send you spam. Unsubscribe at any time. Powered by ConvertKit